Technical data

Integrated Service Digital Network (ISDN) 5-75
Chapter 5: CO/IP
MBX IP Description / Operations & Programming Guide
ISDN CLI
When programmed, the IDSN will send CLI information on incoming and outgoing Calls. On
Incoming Calls, CLI information is delivered to the Calling Party System. On Outgoing Calls,
CLI information is delivered to the Called Party System, and also from the Called Party System
to the MBX IP.
CONDITIONS
- If a CO line is using Representative CLI, that information is sent before other CLI
options.
- If a Station that places or answers the CO call has a CLI number programmed, only
the CLI number of the station is sent as CLI information (similar to Long CLI option of
ipLDK system).
- If a CO line is not using Representative CLI and the Station is not using a programmed
CLI number, then the {CO Own Code} + {Station number} is used as CLI information.
- The Own Code of a CO Line is programmed separately to Incoming CLI and Outgoing
CLI.
- If the CLIP Display option at the Station is Disabled, then Caller CLI is not displayed
on the Station LCD when an incoming call is received.
- If the COLP Display option at the Station is Disabled, then CLI is not displayed on the
Station LCD even after the Called Party answers the Station Outgoing Call.
OPERATION
If set, ISDN CLI operation is automatic.
PROGRAMMING
Station Data
Release 1.0
November 2010