Technical data

IP WAN Dialing After Answer 5-63
Chapter 5: CO/IP
MBX IP Description / Operations & Programming Guide
IP WAN Dialing After Answer
The System permits sending and receiving DTMF signals after connecting to an external VoIP
party. The DTMF signal can be DTMF tone, Text String, or DTMF protocol (H.323 specification)
based on System Programming.
CONDITIONS
- DTMF digits will not be recognized unless the connected VoIP party is transmitting.
- DTMF mode can be assigned in CO Line Group base. 3. If system gets IP call from
unassigned IP address in PGM 362, system ignores it.
OPERATION
System
To make IP Call:
Dial telephone number starting with digit in PGM 360; the system makes IP call to the
assigned IP address.
To receive IP Call:
If system gets call from the assigned IP address in PGM 362; the system routes the call to
the incoming CO group number in PGM 362.
PROGRAMMING
H.323
H.323 Routing Attributes (PGM 360) … see details on page A-150
PGM 360 BTN RANGE DEFAULT
DIGIT (1) -- destination numbers associated with the H.323 routing
system.
1 Max 8 digits -
DEST IP ADDR -- destination IP address associated with the H.323
routing system.
2 - 0.0.0.0
Release 1.0
November 2010