Technical data

Incoming Calling Line ID (ICLID) Call Routing 5-58
Chapter 5: CO/IP
MBX IP Description / Operations & Programming Guide
OPERATION
System
The System will implement routing automatically based on database entries and the
received ICLID.
PROGRAMMING
CO Line Data
ICLID Service (PGM 165 - FLEX 7) … see details on page A-54
Alternative Ring Table (PGM 181) … see details on page A-66
PGM 165 BTN RANGE DEFAULT
ICLID SERVICE -- if this feature is set to ON, incoming call is routed
according to ICLID Table(PGM 262)
7 0: Off
1: On
Off
PGM 181 BTN RANGE DEFAULT
SERVICE TYPE -- If set as 0-2, ring option is applied to ring
assigned stations. Otherwise, if set to 3, feature code is
activated for incoming calls.
1 0: All Ring
1: First Idle
2: Circular
3: Feature Code
All Ring
CO RING ASSIGN -- Destination stations can be edited using
a range or one by one. If press Flex 1-4 and then dial station
range (up to 30 stations) or edit one station number.
2 (00-30) or one
station number
-
FEATURE CODE -- If set to Feature Code and valid feature
code is assigned, then assigned feature is activated when
there is an incoming call.
NOTE: Feature Code is not applied to rerouted calls.
3 Valid Feature
Code (Refer to
PGM115)
-
FEATURE DELAY -- If Service type is set to Feature code, it
can be delayed.
4 00-30 (secs) 00
Release 1.0
November 2010