Technical data

H.323 Multi Route Service 5-56
Chapter 5: CO/IP
MBX IP Description / Operations & Programming Guide
H.323 Multi Route Service
The system can set-up several destination IPs for one prefix. The destination IP is selected
circularly when user tries to make a H.323 call.
CONDITIONS
- This feature is for only VoIP (H.323).
OPERATION
Operation of this feature is automatic when programmed.
PROGRAMMING
H.323
H.323 Route Attribute (PGM 360) … see details on page A-150
H.323 VOIB Attributes (PGM 361) … see details on page A-151
PGM 360 BTN RANGE DEFAULT
DIGIT (1) -- destination numbers associated with the H.323 routing
system.
1 Max 8 digits -
DEST IP ADDR -- destination IP address associated with the H.323
routing system.
2 - 0.0.0.0
PGM 361 BTN RANGE DEFAULT
SETUP MODE -- H.323 IP calls can be set-up using the H.323
Normal or Fast Start mode.
1 0:Normal
1:Fash Mode
Fash Mode
TUNNEL MODE -- H.323 IP calls can be set-up using the H.245
Encapsulation (Tunneling).
2 0:Off
1:On
On
DTMF SEND MODE -- during a connection, DTMF digits can be
sent In-band or Out of band (H.245).
3 0:Inband
1:RFC2833
2:Out
Inband
DIFF SERV -- Diffserv pre-tagging for Voice packet.
NOTE: High values may cause high packet discard levels.
40-63 4
G.711A CODEC -- usage of G.711A Codec Type. 5 0:Not Use
1:Use
Not Use
Release 1.0
November 2010