Technical data

Direct Inward System Access (DISA) 5-53
Chapter 5: CO/IP
MBX IP Description / Operations & Programming Guide
DISA Account Code (PGM 168 - FLEX 2) … see details on page A-55
DISA Retry Count (PGM 168 - FLEX 3) … see details on page A-55
CO to CO Attribute (PGM 179) … see details on page A-63
PGM 168 BTN RANGE DEFAULT
DISA TO CO PASSWORD -- When making CO-to-CO call from DISA
line, password can be requested.
2 0: Off
1: On
Off
PGM 168 BTN RANGE DEFAULT
DISA RETRY COUNT -- When DISA call is failed to route desired
destination, the call can be retried as much as Retry Count.
31-9 3
PGM 179 BTN RANGE DEFAULT
STATION OUTGOING CALL TRANSFER -- while stations are
connected to outgoing CO call of first CO Group, the station
can transfer the call to second CO group.
1 0: Off
1: On
On
OUTGOING CALL TRANSFER -- while ATD is connected to
outgoing CO call of first CO Group, the ATD can transfer the
call to second CO group.
2 0: Off
1: On
On
OUTGOING CALL TRANSFER RELEASE TYPE -- if outgoing
CO call can be transferred to other CO call, release type can
be set. If set to None, it is not disconnected.
30: None
1: Release after
Release Timer
None
OUTGOING
CALL TRANSFER RELEASE TIME -- if an
outgoing CO call is transferred to CO call and CO - to - CO call
is started, the call is disconnected after release time, when
release type is set to 'Rls after Rls Time'. Before disconnecting,
a warning tone is provided.
4 000-300 (sec) 060
INCOMING CALL TRANSFER DIRECTLY -- if this feature
is set to ON, CO incoming call can be transferred directly
without any stations or ATD to transfer the call.
5 0: Off
1: On
Off
STATION INCOMING
CALL TRANSFER -- while stations
are connected to incoming CO call of first CO Group, the
station can transfer the call to second CO group.
6 0: Off
1: On
On
ATD INCOMING
CALL TRANSFER -- while ATD is
connected to incoming CO call of first CO Group, the ATD can
transfer the call to second CO group.
7 0: Off
1: On
On
Release 1.0
November 2010