Technical data

Direct Inward Dial (DID) 5-50
Chapter 5: CO/IP
MBX IP Description / Operations & Programming Guide
HARDWARE
DID, or PRI Module
D2/T3 CHANGED -- The CO Group Access Code and digits
to be sent to PX in 'Day 2/Time 3' when the dialed digit is
pressed if Apply time type is 'FOLLOW LCR'.
12 Max 16 digits -
D3/T1 CHANGED -- The CO Group Access Code and digits
to be sent to PX in 'Day 3/Time 1' when the dialed digit is
pressed if Apply time type is 'FOLLOW LCR'.
13 Max 16 digits -
D3/T2 CHANGED -- The digits to be dialed in 'Day 3/Time 2'
when the dialed digit is pressed if Apply time type is
'FOLLOW LCR'.
14 Max 16 digits -
D3/T3 CHANGED -- The CO Group Access Code and digits
to be sent to PX in 'Day 3/Time 3' when the dialed digit is
pressed if Apply time type is 'FOLLOW LCR'.
15 Max 16 digits -
DNT TIME INDEX -- Day/Night/Timed Time Table Index. 16 1-9, none none
LCR TIME INDEX -- LCR Time Table Index. 17 1-9, none none
NAME -- When DID destination starts to ring, the name is
displayed on the ringing station's LCD.
18 Max 16 digits -
APPLY OPTION -- The Apply Option can be applied
according to the caller.
19 0: All
1: Station
2: CO Line
3: Diable
0:All
PGM 252 BTN RANGE DEFAULT
DISPLAY CONV. DIGIT -- If it is set to ON, the station LCD is updated
to the dialed digits when alerting message is received from the PX
after dialing.
1 On/Off Off
PRINT CONV. DIGIT -- If it is set to ON, the dialed digits are printed
to the SMDR.
2 On/Off Off
PGM 251 BTN RANGE DEFAULT
Release 1.0
November 2010