Technical data

Dial Pulse Signaling 5-45
Chapter 5: CO/IP
MBX IP Description / Operations & Programming Guide
Dial Pulse Signaling
An Analog CO line will send dial Pulse Signals to the Central Office. If programmed as a Pulse
CO line, the System will send open loop pulses at 10 pps with the assigned Break/Make Ratio.
CONDITIONS
- The Break/Make Ratio is System programmable as 60/40 , 66/33 or 50/50.
OPERATION
System
Operation of this feature is automatic when programmed.
PROGRAMMING
CO Line Data
CO Line Dialing Type (PGM 160 - FLEX 10) … see details on page A-47
System Data
Pulse Dial Break Ratio (PGM 223 - FLEX 2) … see details on page A-88
RELATED FEATURES
Dial Pulse to Tone Switchover … see page 3-62
PGM 160 BTN RANGE DEFAULT
DIALING TYPE -- Signal type can be selected; DTMF, Pulse,
R2MFC.
10 0: DTMF
1: PULSE
2: R2
DTMF
PGM 223 BTN RANGE DEFAULT
PULSE DIAL BREAK RATIO -- The break/make ratio for pulse dialing
through analog CO line.
2 0: 60/40
1: 66/33
2: 50/50
1: 66/33
Release 1.0
November 2010