Technical data

CO OWN CODE SERVICE 5-37
Chapter 5: CO/IP
MBX IP Description / Operations & Programming Guide
Alternative CO Ring Table (PGM 181) … see details on page A-66
RELATED FEATURES
Call Forward … see page 3-15
Call Forward, Preset … see page 3-22
CO OWN CODE SERVICE
If a Station places a CO Call, it can send CLI including its CO Own Code towards the receiving
PX. Alternatively, CO Own Code can be included into CLI Information if an Incoming CO Call
makes an Outgoing CO Call. The CO Own Code is sent adding ahead of station number or
received CLI.
CONDITIONS
- This feature can be set for each outgoing/incoming CO line.
- The outgoing CO own code and the incoming CO own code are independent.
- The maximum own code length is 16.
PROGRAMMING
CO Line Data
PGM 181 BTN RANGE DEFAULT
SERVICE TYPE -- If set as 0-2, ring option is applied to ring
assigned stations. Otherwise, if set to 3, feature code is
activated for incoming calls.
1 0: All Ring
1: First Idle
2: Circular
3: Feature Code
All Ring
CO RING ASSIGN -- Destination stations can be edited using
a range or one by one. If press Flex 1-4 and then dial station
range (up to 30 stations) or edit one station number.
2 (00-30) or one
station number
-
FEATURE CODE -- If set to Feature Code and valid feature
code is assigned, then assigned feature is activated when
there is an incoming call.
NOTE: Feature Code is not applied to rerouted calls.
3 Valid Feature
Code (Refer to
PGM115)
-
FEATURE DELAY -- If Service type is set to Feature code, it
can be delayed.
4 00-30 (secs) 00
Release 1.0
November 2010