Technical data

CO/IP LINE PRESET FORWARD 5-35
Chapter 5: CO/IP
MBX IP Description / Operations & Programming Guide
OPERATION
If programmed, DID/DISA Restriction status is displayed to station's LCD.
To change DID/DISA restriction status from each station terminal(toggle):
Dial the {DID/DISA Restriction Feature Code}.
PROGRAMMING
Station Data
DID/DISA Restriction (PGM 134 - FLEX 12) … see details on page A-36
Numbering Plan
DID/DISA Restriction (PGM 113 - FLEX 108) … see details on page A-21
CO/IP LINE PRESET FORWARD
Each CO/IP Line can be assigned a Ring-No-Answer Preset Forward destination. An incoming
call on the CO/IP line will be routed to the designed Ring Destination, following expiration of the
CO/IP Line Preset No Answer Forward Timer. Preset Forward destination, determined
according to the Ring Assignment Table.
CONDITIONS
- This feature can be set for each Normal-type CO Line, not DID-type CO Lines.
- CO/IP Line Preset Forward is available only when Incoming CO Ring Group
destination is DN; not activated when destination is a Station Group or CCR.
- CO/IP Line Preset Forward will override Call Forward No-Answer at a Station.
- If Destination Station has an External No Answer Preset Call Forward destination set
and the timer is same as CO Preset Forward Timer, CO Preset Call Forward will take
priority. Otherwise the timer that expires first will be applied and Forward Destination
will be applied according to the expired timer.
- CO/IP line Preset Forward is disabled if the Preset Forward Timer is set to 0.
PGM 134 BTN RANGE DEFAULT
DID DISA RESTRICTION -- If set to ON, incoming DID or DISA ring
to DN is restricted.
12 0:Off
1:On
Off
BTN FEATURE (PGM 113) REMARK
108 DID/DISA Restriction 685
Release 1.0
November 2010