Technical data

CO Line Service 5-34
Chapter 5: CO/IP
MBX IP Description / Operations & Programming Guide
Alternative CO Ring Table (PGM 181) … see details on page A-66
DID/DISA Restriction
DID or DISA calls to some stations can be restricted according to Admin Program.
If some station number is set to DID/DISA restriction, the information us displayed on the
station's LCD.
CONDITIONS
- When the caller dialed the station's DID or DISA number, the call is restricted.
- Other calls (ring assigned CO calls or forwarded or transferred calls, etc) are not
restricted.
- This feature is not applied to SIP phones.
CO DELAY ANSWER TMR -- For Incoming calls on the ISDN
Line, this parameter defines the delay time between Alerting
and Connect Message.
15 0-100 (100msec) 0
OFFNET FWD USAGE -- ISDN lines can be set to use Call
Deflection/Call Rerouting service if PSTN supports these
feature.
16 0:Join
1:Call Deflection
2:Call Rerouting
Join
PGM 181 BTN RANGE DEFAULT
SERVICE TYPE -- If set as 0-2, ring option is applied to ring
assigned stations. Otherwise, if set to 3, feature code is
activated for incoming calls.
1 0: All Ring
1: First Idle
2: Circular
3: Feature Code
All Ring
CO RING ASSIGN -- Destination stations can be edited using
a range or one by one. If press Flex 1-4 and then dial station
range (up to 30 stations) or edit one station number.
2 (00-30) or one
station number
-
FEATURE CODE -- If set to Feature Code and valid feature
code is assigned, then assigned feature is activated when
there is an incoming call.
NOTE: Feature Code is not applied to rerouted calls.
3 Valid Feature
Code (Refer to
PGM115)
-
FEATURE DELAY -- If Service type is set to Feature code, it
can be delayed.
4 00-30 (secs) 00
PGM 166 BTN RANGE DEFAULT
Release 1.0
November 2010