Technical data

CO Line Service 5-29
Chapter 5: CO/IP
MBX IP Description / Operations & Programming Guide
CO COS
The permission/restriction level can be set for each CO line. If an Internal user with lower-level
permissions attempts a call or trunk dials, COS will be applied.
OPERATION
If set, CO COS operation is automatic.
PROGRAMMING
CO Line Data
CO COS Assign (PGM 177) … see details on page A-63
DID Name Service
When there's DID call, if name is programmed in Digit Conversion Table and dialed digit is
matched, the name is displayed on ringing Station's LCD.
OPERATION
If programmed, did name is displayed to DID destination station's LCD.
PROGRAMMING
Table Data
DID Name (PGM 251) … see details on page A-107
PGM 177 BTN RANGE DEFAULT
DAY COS -- CO COS in Day mode. 1 00-15 0
DAY COS -- CO COS in Night mode. 2 00-15 0
DAY COS -- CO COS in Timed mode. 3 00-15 0
PGM 251 BTN RANGE DEFAULT
APPLY T-TYPE -- The Apply time type to be applied when the
dialed digit is dialed.
1 0:Unconditional
1:Follow DNT
2: Follow LCR
Unconditional
DIALED DIGITS -- The dialed digits. 2 Max 16 digits -
UNCOND CHANGED -- The CO Group Access Code and
digits to be sent to PX when the dialed digit is pressed if
Apply time type is 'unconditional'.
3 Max 16 digits -
Release 1.0
November 2010