Technical data

CO Line Service 5-28
Chapter 5: CO/IP
MBX IP Description / Operations & Programming Guide
Digit Sending Mode
For calls that are initiated using an Access Code, the sending digits can be set for en-blocked
or overlapped.
OPERATION
If set, Digit Sending Mode is automatic.
PROGRAMMING
CO Line Data
Digit Sending Mode (PGM 162 - FLEX 2) … see details on page A-49
NO ANSWER TONE -- If destination is set to Tone, the
Error / Busy tone is heard.
5- -
NO ANSWER PILOT HUNT GROUP -- The CO call is
routed to Pilot Hunt Group of the original destination.
6- -
NO ANSWER RING -- The call is routed to the same
destination again.
7- -
NO ANSWERThe CO call is routed to the transferred
station again.
Only possible for 'Transfer No Answer' case.
8- -
PGM 162 BTN RANGE DEFAULT
DIGIT SENDING MODE -- CO lines can be set to send digit with
overlap or enblock method.
20:Overlap
1:Enblock
Overlap
PGM 173 BTN RANGE DEFAULT
Release 1.0
November 2010