Technical data

CO Line Service 5-27
Chapter 5: CO/IP
MBX IP Description / Operations & Programming Guide
Outgoing CO Alternative Attribute (PGM 173) … see details on page A-60
CHARGE MODE -- If 'FREE', the external call
though CO line is not printed/saved to SMDR
even though SMDR is enabled.
If 'REPORT', the external call though CO, line
is included to SMDR according to the SMDR
Attributes.
11 0: Free
1: Report
Report
METERING TYPE -- According to PSTN
service type, metering type can be selected
among 00-12 to manage call charge. 01-06
can be applied to LCO lines, 07-12 can be
applied to ISDN lines.
12 00: None
01: 12KHz
02: 16KHz
03: 50KHz
04: SPR
05: PPR
06: NPR
07: AOC 0(Standard)
08: AOC 1 (Italy & Spain)
09: AOC 2 (Finland)
10: AOC 3 (Australia)
11: AOC 4 (Belgium)
12: AOC 5 (Netherlands)
None
PGM 173 BTN RANGE DEFAULT
DAY ALT DEST -- Abnormal case can be selected as
error type.
- F1: Recall No Answer
F2:Transfer No Answer
F3: No Answer
-
NO ANSWER DISCONNECT-- The CO call is
disconnected. Every destination is set to 'Disconnect'
by default.
1- -
NO ANSWER ATTENDANT -- The CO call is routed to
Attendant.
2- -
NO ANSWER CO RING ASSIGN -- The CO call is
routed according to Ring Assign Table. (see PGM 167)
3- -
NO ANSWER ALT RING TBL -- If destination is set to
Alt Ring Table and the Table index is assigned, the CO
call is routed according to Alt Ring Table. (See PGM
181)
4 01-80 -
PGM 160 BTN RANGE DEFAULT
Release 1.0
November 2010