Technical data

Auto Service Mode Control 3-10
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
Auto Service Mode Control
The service mode defines different ring assignments, COS and answering privileges for the
system. The service mode can be controlled automatically through definitions in the Auto Ring
Mode Selection Table, which defines the time of day for Day, Night and Timed shift modes. The
Attendant may change the system mode selection from automatic to manual.
CONDITIONS
- If the system has Holiday information and current mode is Holiday, service mode is
operated as Night mode
OPERATION
System
Operation of this feature is automatic.
ADMIN PROGRAMMING
Table Data
System Time Table (PGM 253) … see details on page A-110
PGM 253 BTN RANGE DEFAULT
TIME ZONE COMMENT-- defines the comment of the Time
Table.
1 32 characters none
SYSTEM TIME ZONE -- defines the Time Zone of the Time Table 2 0-73 0: Sys Time
DAYLIGHT SAVINGS -- defines Daylight Saving Time of Time
Table.
3On/Off Off
RING MODE -- defines the ring mode of Time Table. 4 0: Day
1: Night
2: Timed
0: Day
AUTO RING MODE -- defines the Auto Ring mode of the Time
Table.
5 On/Off Off
Release 1.0
November 2010