Technical data

CO Line Service 5-22
Chapter 5: CO/IP
MBX IP Description / Operations & Programming Guide
CALLING TYPE -- for Incoming calls on the ISDN Line,
this parameter defines the "Type of Number Plan"
provided in Connected Party Information Element of the
ISDN call CONNECT message.
3 0: Unknown
1: International
2: National
3: Subscriber
4: Not Used
Subscriber
CALLING NUM PLAN -- select connected number plan
of ISDN CONNECT message.
4 0: Unknown
1: I SDN/Telephony
2: Data
3: Telex
4: National
5: Private
Unknown
SEND PROGRESS IND -- if this feature is set to ALL,
Progress Indicator is sent to the ISDN PSTN about All
Message.
If this feature is set to ALERTING, Progress Indicator is
sent to the ISDN PSTN about Alerting Message.
50 : NO
1: ALL
2: ALERTING
NO
R2 ANI SVC REQ -- if this feature is set to ON to R2 line,
system request ANI digits (CLI data) to the calling party.
6 0: Off
1: On
Off
ICLID SERVICE -- if this feature is set to ON, incoming
call is routed according to ICLID Table(PGM 262)
7 0: Off
1: On
Off
OWN CODE TO TRANSIT CLI -- if this feature is set to
ON, original caller's CLI is sent when there is transit call.
8 0: Off
1: On
Off
OWN CODE -- Own Code. 9 Max 16 digits -
CLI PREFIX CODE -- prefix code is inserted ahead of
received CLI data according to call type.
10 Max 2 digits -
INTERNATIONAL CODE -- International Code is
inserted ahead of received CLI data according to call
type.
11 Max 4 digits -
TRANSIT CLI 1 -- if Transit CLI type of outgoing CO line
is set to 1, Transit CLI 1 is sent.
12 Max 24 digits -
TRANSIT CLI 2 -- if Transit CLI type of outgoing CO line
is set to 2, Transit CLI 2 is sent.
13 Max 24 digits -
TRANSIT CLI 3 -- if Transit CLI type of outgoing CO line
is set to 3, Transit CLI 3 is sent.
14 Max 24 digits -
PGM 165 BTN RANGE DEFAULT
Release 1.0
November 2010