Technical data

CO Line Service 5-19
Chapter 5: CO/IP
MBX IP Description / Operations & Programming Guide
Alternate Incoming CO Service
If the system cannot answer for an incoming CO call, a programmed service can be provided
or it can be routed into a programmed destination. This feature is applied by incoming CO
Group base Administrator to select the Routing Destination for the Incoming CO line on a
case-by-case basis as follows:
• Busy – When calling a Busy User, the call can be set for routing destination,
Disconnect, ATD, CO Ring Assign, Alt Ring Table, Tone, or Pilot Hunt.
• No Answer – When an Incoming Call goes unanswered, it can be set for routing
destination, Disconnect, ATD, CO Ring Assign, Alt Ring Table, Tone, or Pilot Hunt.
• Transfer No Answer – When an Incoming Call goes unanswered after an unscreened
transfer, the call can be set for routing destination, Disconnect, ATD, CO Ring Assign,
Alt Ring Table, Tone, Pilot Hunt, or Transfer Station.
• Recall No Answer – When an Incoming Call goes unanswered after a recall on a CO
call, the call can be set for routing destination, Disconnect, ATD, CO Ring Assign, Alt
Ring Table, Tone, or Pilot Hunt.
• Vacant – If dialing analysis determines an Incoming CO Call is to a vacant number, the
call can be set for routing destination, Disconnect, ATD, CO Ring Assign, Alt Ring
table, or Tone.
• DND – If an Incoming CO call is attempted to a DND User, the call can be set for
routing destination, Disconnect, ATD, CO Ring Assign, Alt Ring table, Tone, or Pilot
Hunt.
• Handset Lifted – If an Incoming CO Call is received at a Station where the handset is
lifted (Off-Hook), the call can be set for routing destination, Disconnect, ATD, CO Ring
Assign, Alt Ring table, Tone, or Pilot Hunt.
• Blocking – If an Incoming Call is placed to a Blocked User, the call can be set for
routing destination, Disconnect, ATD, CO Ring Assign, Alt Ring table, Tone, or Pilot
Hunt.
CONDITIONS
- This feature can be set for each incoming CO Group.
- The destination is set differently according to Day, Night, and Time modes.
MAX TRANSFER RING TIMER -- Max. Ring Time when
outgoing CO is transferred/recalled.
7 001-300 (sec) 120
OUTGOING TIME TABLE -- The time Table index to be applied
to outgoing CO Calls
8 1-9, none none
PGM 171 BTN RANGE DEFAULT
Release 1.0
November 2010