Technical data

CO Line Service 5-17
Chapter 5: CO/IP
MBX IP Description / Operations & Programming Guide
CALLING NUM PLAN -- Select Calling number plan
of ISDN SETUP message.
4 0: Unknown
1: I SDN/Telephony
2: Data
3: Telex
4: National
5: Private
Unknown
CALLED NUM PLAN ID -- Select Called number
plan of ISDN SETUP message.
5 0: Unknown
1: I SDN/Telephony
2: Data
3: Telex
4: National
5: Private
Unknown
BEARER CAPABILITY - Select Bearer Capability of
ISDN SETUP message.
6 0: Speech
1: Unrestricted
2: Restricted
3: 3.1KHz Audio
4: 7KHz
5:Video
Speech
ISDN LINE TYPE -- The system will encode voice
using the A-law or u-law PCM format and should be
set to match the ISDN Back bone type.
70:A-law
1:U-law
A-law
SENDING COMPLETE IE -- If set, will send
'Sending Complete' IE to ISDN SETUP message.
80: Off
1: On
Off
MAKE TRANSIT CLI -- When no CLI is sent with a
transit call, system will initiate a CLI to CO direct
transit call.
90: Off
1: On
Off
OWN CODE TO TRANSIT CLI -- If this feature is set
to ON and same feature of incoming CO attribute is
also set to ON, then Own code of outgoing CO line
is inserted to the CLI of transit CO call.
10 0: Off
1: On
Off
USE REPRESENTATIVE CLI -- If this feature is set
to ON, representative CLI is used to every outgoing
call of selected CO line.
11 0: Off
1: On
Off
REPRESENTATIVE CLI -- When 'Use Represent
CID'(PGM170-F10) is set to ON, representative CLI
is sent when making outgoing call regardless of
other CLI attribute.
12 Max 16 digits -
PGM 170 BTN RANGE DEFAULT
Release 1.0
November 2010