Technical data

CO Line Service 5-16
Chapter 5: CO/IP
MBX IP Description / Operations & Programming Guide
Outgoing CO Attributes (PGM 170-171) … see details on page A-56
DIALING TYPE -- Signal type can be selected;
DTMF, Pulse, R2MFC.
10 0: DTMF
1: PULSE
2: R2
DTMF
CHARGE MODE -- If 'FREE', the external call
though CO line is not printed/saved to SMDR
even though SMDR is enabled.
If 'REPORT', the external call though CO, line
is included to SMDR according to the SMDR
Attributes.
11 0: Free
1: Report
Report
METERING TYPE -- According to PSTN
service type, metering type can be selected
among 00-12 to manage call charge. 01-06
can be applied to LCO lines, 07-12 can be
applied to ISDN lines.
12 00: None
01: 12KHz
02: 16KHz
03: 50KHz
04: SPR
05: PPR
06: NPR
07: AOC 0(Standard)
08: AOC 1 (Italy & Spain)
09: AOC 2 (Finland)
10: AOC 3 (Australia)
11: AOC 4 (Belgium)
12: AOC 5 (Netherlands)
None
PGM 170 BTN RANGE DEFAULT
SCREEN INDICATOR -- Determines if screen
indicator is used in ISDN message.
1 0: Off (user-provided, not
screened)
1: On (user-provided,
verified and passed)
Off
SENDING CALLER NO -- Sending Caller number
message of ISDN.
20: Off
1: On
On
CALLING TYPE -- For outgoing calls on the ISDN
Line, this parameter defines the "Type of Number
Plan" provided in Calling Party Information Element
of the ISDN call SETUP message.
3 0: Unknown
1: International
2: National
3: Subscriber
4: Not Use
Subscriber
PGM 160 BTN RANGE DEFAULT
Release 1.0
November 2010