Technical data

CO Line Service 5-14
Chapter 5: CO/IP
MBX IP Description / Operations & Programming Guide
Outgoing CO Line Option
The following options support the Outgoing CO line:
• Screen Indicator – Determines if Screen Indicator information is included when it
consists of ISDN CLI information.
• Calling Party Number – Determines if Calling Party Number information is included
when it consists of ISDN CLI information.
• ISDN Calling Number – Determines if the ISDN Setup Message includes CLI
information or not.
• ISDN Bearer Capability – Includes the specific Bearer Capability information on the
Setup Message ignoring the received Bearer Capability if an ISDN Internal User or
PRI Transit Incoming Call places an Outgoing Call.
• Digit Sending Complete IE – Determines if Digit Sending Complete IE message is
included on an ISDN information message.
• CLI Information when Transit – Determines if CLI Information is included on Outgoing
Transit Calls when no information is provided on Incoming Transit Calls.
• CLI Information to Transmit Toward PX on Outgoing Transit Calls – Creates new CLI
by adding or deleting the received CLI Information.
• Calling Party Numbering Plan – Determines Calling Party Numbering Plan information
if it consists of ISDN CLI information on Outgoing Transit Call.
• RBT Support – Determines if System supports RBT if the PX does not support RBT
when an Internal User places an Outgoing Call seizing the Trunk CO Line.
CONDITIONS
- This feature can be set for each outgoing CO line.
INCOMING TIME TABLE -- The time Table index to be applied
to incoming CO Call.
14 1-9, none none
CO DELAY ANSWER TMR -- For Incoming calls on the ISDN
Line, this parameter defines the delay time between Alerting
and Connect Message.
15 0-100 (100msec) 0
OFFNET FWD USAGE -- ISDN lines can be set to use Call
Deflection/Call Rerouting service if PSTN supports these
feature.
16 0:Join
1:Call Deflection
2:Call Rerouting
Join
PGM 166 BTN RANGE DEFAULT
Release 1.0
November 2010