Technical data

CO/IP Line Groups 5-7
Chapter 5: CO/IP
MBX IP Description / Operations & Programming Guide
CO Outgoing BLF Usage (PGM 171 – FLEX 4) … see page A-59
RELATED FEATURES
Station Speed Dial … see page 3-143
CO/IP Line Groups
All CO Lines are included on one Outgoing CO Group and one Incoming CO Group individually.
One CO Line cannot be a member of several CO Groups at the same time.
The CO/IP Lines in the System can be placed together into Groups for assigning access by
Stations and common Access Dial codes (up to 24 Groups on MBX IP 100, and 72 Groups on
MBX IP 300).
CONDITIONS
- Outgoing CO Line Groups and Incoming CO Line Groups are separated.
- CO/IP Lines in each CO Group can also be accessed individually by dialing the {CO
Line Access Feature Code} and the CO/IP Line number.
- The System will select a CO/IP Line from a group based on the Round Robin, First
Choice or Last Choice determined by database assignments.
- Multiple {CO Group Access Code} can be assigned to a CO Group.
- If a CO Line is not included in an outgoing CO line group, this line has to be seized
using a Flex button or System feature code.
PROGRAMMING
System Data
CO Group Access Code (PGM 114) … see details on page A-22
PGM 171 BTN RANGE DEFAULT
BLF USAGE -- If this feature is set to ON, flex
button LED will be flashing when CO line is
programmed on the button.
4 0: Off
1: On
On
PGM 114 BTN RANGE REMARK
CO GRP ACCESS CODE (Edit By Range) 1 Start CO Grp Access Code
& End CO Grp Access Code
-
CO GRP ACCESS CODE (Edit) 2 CO Grp Access Code -
Release 1.0
November 2010