Technical data

Automatic Network Dialing 5-2
Chapter 5: CO/IP
MBX IP Description / Operations & Programming Guide
CO Line Data
CO Group Access Code Attributes (PGM 180) … see page A-64
- ARS Service (FLEX 5)
- ARS Digit (FLEX 6-7)
- ARS Digit Usage (FLEX 7, 9)
- AND Digit (FLEX 4)
Automatic Network Dialing
When a Station User dials a CO Group Access Code and a CO Line is seized, Automatic
Network Dialing (AND) enables an automatic digit dialing. Using this feature, a CO Group
Access code can be dialed automatically when a User is making an external call through
another System.
CONDITIONS
- AND can place calls automatically by dialing all of the necessary digits or some digits,
as programmed.
- AND digits (up to 10) for placing calls can be registered on each CO Group Access
codes.
- If the CO line is seized using the {CO Line Access} feature code, AND digit is not
supported.
- AND is enabled only when CO line is seized using a CO Group Access Code.
PGM 180 BTN RANGE DEFAULT
AND DGT -- Automatic Network Dialing (AND) digit is sent after CO
line seized. This feature allows user to initiate CO calls only by dialing
CO Group Access Code.
4 Max 10
digits
-
ARS SERVICE -- If Alternate Route Selection (ARS) is set, ARS digit
is dialed instead of CO Group Access code when there is no
available path.
5 0: Off
1: On
Off
ARS DGT 1 -- Alternate CO Group Access code to be used when
original CO Group Access code failed to find available CO line.
6 Max 8
digits
-
ARS 1 OGR DGT -- When alternate CO Group Access code is used,
this field defines if original digits or converted digits are used.
7 0: Off
1: On
Off
ARS 2 OGR DGT -- When alternate CO Group Access code is used,
this field defines if original digits or converted digits are used.
9 0: Off
1: On
Off
Release 1.0
November 2010