Technical data

Alternative Route Selection 5-1
Chapter 5: CO/IP
MBX IP Description / Operations & Programming Guide
Chapter 5
CO/IP
This chapter provides detailed information covering description and operation of the CO/IP
features available in the MBX IP System Software.
Alternative Route Selection
This feature is enabled if there are several paths in order to connect toward a destination
System. If a selected path is not available for some reason (All Busy, Line Fault, etc),
Alternative Route Selection (ARS) will connect calls using another designated path.
CONDITIONS
- ARS is optional and must be programmed to be operational.
- Up to 2 ARS pats can be assigned for each CO Group Access code.
- ARS digits should be contained in the CO Group Access Code, and will be applied
when feature is initiated.
- ARS can be used in coordination with Last Number Redial, Station Speed Dial, and
System Speed Dial.
- If ARS is operated with Digit Conversion Table, Dialed or Converted Digit will be
provided to CO line after ARS service.
OPERATION
If set, Alternative Route Selection operation is automatic.
PROGRAMMING
Numbering Plan
CO Group Access Code (PGM 114) … see page A-22
PGM 114 BTN RANGE REMARK
CO GRP ACCESS CODE (Edit By Range) 1 Start CO Grp Access Code
& End CO Grp Access Code
-
CO GRP ACCESS CODE (Edit) 2 CO Grp Access Code -
Release 1.0
November 2010