Technical data

Push-To-Talk Paging 4-24
Chapter 4: Intercom
MBX IP Description / Operations & Programming Guide
Push-To-Talk Paging
Digital Phone can be assigned as a member of one of the System’s Push-To-Talk (PTT) Page
Groups. The Digital Phone User may log-in or log-out of any one or all PTT Groups it is a
member of. Once logged in, the User may place or receive One-Way Page announcements
to/from other Users who are logged-in to the same PTT group. To place a PTT Page
announcement, the User must press and hold the {PTT} Flex button.
An Attendant may log-in/-out other Stations to/from PTT groups.
CONDITIONS
• Conditions associated with Internal/External & All Call Page apply to PTT Paging.
• To access PTT Paging, the Station must be permitted access to System Paging.
• If allowed access to all PTT Groups, a Station may log-into all Groups (PTT Group 0) to
place announcements to all Groups simultaneously and receive announcements from any
group.
• A Station can only Log-In to PTT groups to which it is assigned as a member.
• The Station must have a {PTT} button to place or receive PTT announcements; by default,
the WLAN phone is assigned a PTT button.
• The Station may be assigned and Logged-In to the default active PTT group in the System
database.
OPERATION
Digital Phone
To assign a {PTT} Flex button:
Press [PGM] + {FLEX} + Button Feature Type (1)+ {PTT} + [SAVE]
To Log-In to a PTT group:
1. Dial the {PTT Log-in/-out code}.
2. 2. Dial the desired PTT Group Number.
To Log-Out of the PTT group(s):
1. Dial the {PTT Log-in/-out code}.
2. Dial ‘*’.
To place a Page to the active PTT Group:
1. Press and hold the {PTT} Flex button.
2. Make the desired Page announcement after hearing confirmation tone.
Release 1.0
November 2010