Technical data

Paging 4-16
Chapter 4: Intercom
MBX IP Description / Operations & Programming Guide
Paging
Internal/External & All Call Page
A Station that is set-up for using the Page features, can connect and transmit voice
announcements to any or all of the System Internal/External Page Zones. Stations are grouped
into “Zones” to receive Pages directed at each Zone. Stations not assigned to any Zone will not
receive a Page including All Call Pages.
A Page Ring will be provided to the Page Zone(s) prior to the Audio Connection. The User is
allowed to continue the Page for the specified Page Time-out Timer after which the User is
disconnected and the Page Zone(s) is returned to idle.
The default Page Zone Dial codes are:
Paging Dial Codes
Flexible buttons of a Digital Phone may be assigned to access a Page Zone as a {PAGE ZONE}
button.
CONDITIONS
- Stations that are not enabled to Page, will receive an Error tone when any Page
Access code is dialed.
- Stations in DND or Busy will not receive Page announcements.
- A Station accessing a Page Zone is considered Busy.
- Stations, that are not included in any Internal Page Zone, will not receive any page,
including All Call.
- For External Paging, an External Amplifier and Speaker(s) are required.
- The System External Control Contacts may be assigned to activate when External
Page is accessed.
Page Type MBX IP 100 MBX IP 300
Internal Page Zones 543 + Group Number 543 + Group Number
Internal All Call Page 543 = 00 543 + 00
External Page Zone 548 548
All Call Page 549 549
Release 1.0
November 2010