Technical data

Message Wait/Call Back 4-15
Chapter 4: Intercom
MBX IP Description / Operations & Programming Guide
Message Wait Reminder Tone
In addition to the [MSG/CALLBK] button LED, the Digital Phones can be sent a tone as a
periodic reminder to the user of MWIs in queue. This tone is sent to the Station only while
Idle, and is heard over the Speaker.
CONDITIONS
- The interval between tones can be 00 to 60 minutes; the 00 setting will disable the
MWI Reminder Tone.
- The Reminder Tone will continue repeating notification until all messages have been
retrieved.
- A Busy Station or Station in DND will not receive the MWI Reminder Tone.
- SIP Phone and DECT do not support the MWI Reminder Tone feature.
OPERATION
System
When programmed, the MWI Reminder Tone is automatically sent to Stations in Idle as
appropriate.
PROGRAMMING
System Data
Message Reminder Tone Timer (PGM 222 - FLEX 2) … see details on page A-87
HARDWARE
Digital Phone
PGM 222 BTN RANGE DEFAULT
MSG WIT ALERT TONE TMR -- A phone user will receive periodic
reminder tones of a message waiting at intervals based on this timer.
2 00-60
(minutes)
00
Release 1.0
November 2010