Technical data

Message Wait/Call Back 4-13
Chapter 4: Intercom
MBX IP Description / Operations & Programming Guide
Digital Phone
To leave a Message Wait:
1. While receiving a Ring Back tone or No answer on a Call Announce (H or P mode).
2. Press the [MSG/CALLBK] button; a confirmation tone will be heard.
3. On Hang-up, the MWI is activated.
To leave a Message Wait:
1. While receiving a DND tone, press the [MSG/CALLBK] button; a confirmation tone will
be heard.
2. On Hang-Up, the MWI is activated.
To leave a Call Back (queue for a station):
1. While receiving a Busy Signal on an attempted call, press the [MSG/CALLBK] button;
the confirmation tone will be heard.
2. Hang up, and return to Idle.
To respond to a Call Back Recall Request:
1. When the Busy Station returns to Idle, the System initiates a Call Back to the
Originating Station.
2. Lift the handset or press the [SPEAKER] button.
3. Previously Busy Station is called.
To retrieve Station MWIs:
1. At the Station, press the [MSG/CALLBK] button; either the message contents
summary will be displayed (shown), or the Station Messages Waiting notification will
be displayed.
2. Dial 1 or 2,
• 1. MWI: Absent Call
• 2. VMS: VMIB Message
3. Press the [VOL UP]/[VOL DOWN] button to scroll.
To return a Call from the Current Station Message:
While message is active, press the [HOLD/SAVE] button.
MWI(05) VMS(03)
ENTER (MWI:1, VMS:2)
Release 1.0
November 2010