Technical data

INTRUSION 4-10
Chapter 4: Intercom
MBX IP Description / Operations & Programming Guide
INTRUSION
A Station User can Intrude upon an active Station conversation. If assigned, when the Station
Intrudes an Intrusion Tone is provided, and a conference is established among the Intrusion
Station, and the Station and CO/IP party.
CONDITIONS
• A Station must be enabled for Intrusion feature to work.
• If the Called Station has the Auto Privacy option set to ON then the call cannot be Intruded
upon.
OPERATION
To perform an Intrusion:
1. Lift Handset or press [Speaker], and place call in the normal manner.
2. When Busy tone is heard, press [TRANS] button and dial the {Intrude Register
Feature Code}.
3. When finished with Intrusion call, Hang-Up and return to Idle.
PROGRAMMING
Station Data
Intrusion Access (PGM 132 - FLEX 5) … see details on page A-34
Auto Privacy (PGM 134 - FLEX 11) … see details on page A-36
RELATED FEATURES
One Digit Service … see page 3-126
PGM 132 BTN RANGE DEFAULT
INTRUSION ACCESS -- enables intrusion to gain access to an active
call.
50: Disable
1: Enable
Disable
PGM 134 BTN RANGE DEFAULT
AUTO PRIVACY -- Enables auto privacy feature (to restrict the
intrusion/call-wait/camp-on/OHVA in busy station)
11 0: Off
1: On
Off
Release 1.0
November 2010