Technical data

Intercom Step Call 4-7
Chapter 4: Intercom
MBX IP Description / Operations & Programming Guide
PROGRAMMING
Station Data
Howler Tone (PGM 121 - FLEX 7)… see details on page A-25
Tenant Data
Dial Tone … use Web Admin (PGM 290 - FLEX 1-2)
Intercom Step Call
When the Busy Tone is received on a dialed Intercom call, the User may place a call to
another Station by dialing the last digit of the Station number. The System replaces the
last digit of the previously dialed Busy Station with the dialed digit and places an Intercom
call to the new Station number.
CONDITIONS
- If the user dials the last digit of the Busy Station, Camp-On will be activated.
- After receiving a Busy tone, if the user takes no action for the Busy Tone Timer
(7sec.), the System will start the Intercom Lockout procedure.
- If programmed, Step call is supported.
OPERATION
Digital Phone
To activate Step call:
1. While receiving Busy notification on a dialed ICM call, dial a digit other than the last
digit of the busy Station intercom number.
2. The System will attempt an ICM call to the new Station.
PROGRAMMING
Tenant Data
Internal Busy Tone … use Web Admin (PGM 290 - FLEX 8)
PGM 121 BTN RANGE DEFAULT
HOWLING TONE -- sets Anonymous Call Restrict service. 7 0: Off
1: On
On
Release 1.0
November 2010