Technical data

Intercom Lock-out 4-6
Chapter 4: Intercom
MBX IP Description / Operations & Programming Guide
PROGRAMMING
Station Data
Forced Handsfree Access (PGM 132 - FLEX 1) … see details on page A-34
Numbering Plan
Forced Handsfree Code (PGM 113) … see page A-20
RELATED FEATURES
Intercom Signaling Mode … see page 6-11
Intercom Lock-out
If the User takes no action after going Off-Hook for the Dial Tone Timer, or fails to dial an
additional digit within the Inter-Digit Timer, the Station will receive an Error Tone for 30 seconds
and phone will be placed out-of-service (locked-out). The LED of the associated {DSS} buttons
as well as the Station [ICM] button will flutter (flash) rapidly to indicate the out-of-service state.
For Digital Phone users, if the [SPEAKER] is used, the Station will receive the Error tone for 30
seconds and then automatically return to idle.
CONDITIONS
- If the Station is assigned with the Howler Tone, the Error tone is presented at the
expiration of the Error Tone Timer. The Howler Tone is presented for the Howling
Tone Timer expiration, and the Station is placed out-of-service (lockout and silence).
OPERATION
System
Operation of Intercom Lockout is automatic based on the Dial Tone & Inter-Digit Timers.
PGM 132 BTN RANGE DEFAULT
FORCED HANDFREE ACCESS -- when placing an intercom call, a
user can change the ICM signaling mode, Tone Ring to Hands free
answer mode or Hands free answer to Tone Ring mode.
10: Disable
1: Enable
Disable
FEATURE (PGM 113) BTN REMARK
Forced Handsfree Call 59 537
Release 1.0
November 2010