Technical data

Intercom Caller Controlled ICM Signaling 4-5
Chapter 4: Intercom
MBX IP Description / Operations & Programming Guide
3. Replace the handset.
To retrieve the held ICM call:
Lift the handset; station is connected with the Held party.
PROGRAMMING
Numbering Data
Feature Numbering Plan (PGM 113) … see details on page A-18
RELATED FEATURES
Music-On-Hold (MOH) … see page 3-122
Intercom Call (ICM Call) … see page 4-2
Hold … see page 3-100
Hold Recall … see page 3-101
Intercom Caller Controlled ICM Signaling
A User can change the Signaling mode of an ICM call from Tone ring to Voice announce.
CONDITIONS
- The ICM Signal mode cannot be changed if the Called Station number is {MADN}.
- If the Signaling mode is changed, the Call is not subject to Call Forward, No Answer.
- The Signaling mode for a specific Intercom call can only be changed once and cannot
be changed back to the original Signaling mode.
- Changing the Signaling mode does not affect privacy at the Called Station.
OPERATION
To change the ICM Signaling mode:
1. Dial {Force HF Calling Code}.
2. Place intercom call,
OR
1. Place intercom call.
2. Dial #
Release 1.0
November 2010