Technical data

Intercom Call Hold 4-4
Chapter 4: Intercom
MBX IP Description / Operations & Programming Guide
System Data
LED Color/Flash Rate (PGM 234) … see details on page A-98
Inter Digit Timer (PGM 222 - FLEX 3) … see details on page A-87
RELATED FEATURES
Intercom Signaling Mode … see page 6-11
Speakerphone … see page 6-19
Intercom Call Hold
While on an active ICM Call, the Station User can place an ICM Call on Hold. The Held Station
will receive the assigned Music-on-Hold (MOH). The Held call is placed on Exclusive Hold and
will Recalls the after expiration of the Hold Recall Timer.
CONDITIONS
- After placing a Call on Hold, the Station returns to idle and the User can make another
call.
- If the User is in an Off-Hook Status when placing a call on Hold, the dial tone is heard.
OPERATION
Digital Phone
To place an active ICM call on Hold:
Press the [HOLD] button, the [DN] button LED will flash at the designated Hold rate.
To retrieve the held ICM call:
Press the {DN} button associated with the Held station, then the ICM call is connected
again.
SLT
To place an active ICM Call on Hold:
1. Press the Hook-switch during a conversation.
2. Dial {System Hold Code}; confirmation tone is heard.
PGM 222 BTN RANGE DEFAULT
INTER DIGIT TMR -- Sets the maximum allowed time between user
dialed digits; at expiration, the user will receive an error-tone.
3 00-300
(seconds)
015
Release 1.0
November 2010