Technical data

Authorization Codes (Password) 3-5
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
Authorization Codes (Password)
An Authorization Code is tied to a DN, and provides a means to control access to Walking COS,
or DISA and may be required for outgoing CO/IP Lines based on the configuration of the
database. When users dial a valid Authorization Code, the system invokes the Station COS.
The Station Authorization Code includes the associated station number and the assigned code.
A Station Authorization Code is specifically related to a given station and intended for a single
user.
The Administrator and Attendants are permitted to assign any Authorization code including
codes for another station. Normal users may only assign the Station Authorization code for the
specific station.
CONDITIONS
- A user may enter an Authorization Code from any station to place a CO/IP call using
Walking COS.
- An Authorization code may include any dial pad digit except
*
and #.
OPERATION
Digital Phone
To assign a Station Authorization Code:
1. Press the [PGM] button.
2. Dial 34 {Authorization Code Program}.
3. Dial the Authorization Code (1-12 digits).
4. Dial
*
or press the [SAVE] button to save.
Single Line Phone
To assign a Station Authorization code:
1. Lift the handset.
2. Dial [SLT Program Mode Entry code}.
3. Dial Station User Program code 34.
4. Dial Authorization Code (1-12 digits).
5. Dial
*
.
Release 1.0
November 2010