Technical data

Wake-up Alarm 3-279
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
Wake-up Alarm
This feature allows a User or Attendant to set a Wake-Up time or desired time to be alerted.
When the time is reached, the System will signal with an audible and visual notification.
CONDITIONS
- When receiving a Wake-Up signal, lifting the handset will return Wake-Up Answer
Tone.
- The Wake-Up alarm ring signal follows the Ring Table.
- If the User does not answer the Wake-Up Alarm ring, it is repeated according to the
Wake-Up Retry Counter with the interval of Wake-Up Retry Timer.
NOTE: The value ‘N’ of the Wake-Up Retry Counter means that ‘N’ repetition of
Wake-Up Retry can occur after the first Wake-Up Alarm ring occurs.
The wake-up alarm ring will recur according to the Wake-up Retry Time and
continues during Wake-Up Alarm Ring Timer.
If no action is taken by the User until the end of the Wake-Up Retry Counter,
the ring signal is presented at the Attendant Station with a display designating
the Station number that did not respond to Wake-Up Alarm.
- Time (hh:mm) must be entered in the Military format (24-hour).
- The Daily Alarm will reset and repeat each day until erased (cancelled), however,
One-Time Alarm will reset and cancel automatically.
- When registering Wake-up Time, if user dials 1, then the One-Time Alarm will be set
or if User dials 2, then the Daily Alarm will be set.
OPERATION
System Attendant
To register a Wake-Up Alarm:
1. Press the [PGM] button.
2. Dial 045 {Attendant Station Program code}.
3. Dial the desired Station range; for a single station, enter the same Station Number
twice.
4. Enter Time for Alarm (hh:mm).
5. For a Daily reminder (Repeating Alarm), dial #. 6. Press [SAVE] button.
Release 1.0
November 2010