Technical data

VMIB Integrated Auto Attd/Voice Mail 3-266
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
CONDITIONS
- The User must begin dialing within the CCR Analysis timer in response to a system
prompt; if the timer expires, the User will receive an error tone and the System will
disconnect the call.
- When the call sender option results in an external call, dialing restrictions will be
applied based on the Station COS.
- If the User remains Off-Hook after a call placed through the Voice Mail is complete,
the User will be returned to the previous place in the Voice Mailbox. If the user hangs
up, the VMIB will Recall the User, and will present the Request Mailbox Number
prompt.
OPERATION
Digital Phone
To access a Message Retrieval option:
At any time after the Number of Messages prompt, dial a Message Retrieval Option digit;
the System initiates the selection providing any subsequent prompts.
Single Line Phone
To access a Message Retrieval option:
At any time after the Number of Messages prompt, dial a Message Retrieval Option digit;
the System initiates the selection providing any subsequent prompts.
ADMIN PROGRAMMING
Station
Station VMIB Attributes (PGM 145) … page A-43
PGM 145 BTN RANGE DEFAULT
VMIB ACCESS -- Permits station access to VMIB. 1 0: Disable
1: Enable
Disable
PROMPT LANGUAGE INDEX -- Selected language type prompt is
played to the user when accessing the VMIB.
21-3 1
AUTO-RECORD SERVICE -- Determines if user can record a
conversation with another user (internal/external). It can be used
without two-way record button.
30: Disable
1: Enable
Disable
TWO WAY RECORD ACCESS -- When allowed, the station can
activate the Two-way record feature to record a conversation.
4 0:Disable
1:Enable
Disable
Release 1.0
November 2010