Technical data

VMIB Integrated Auto Attd/Voice Mail 3-261
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
Single Line Phone
To retrieve Voice Mail locally:
1. Lift the handset.
2. Dial the {VMIB Access Feature Code}; the Mailbox & Password will be presented
sequentially.
3. Enter the Mailbox number (Station number) and corresponding password; if entry is
valid, the Number of Messages prompt will be presented.
4. Dial desired option code,
1: Play New Messages
2: Play Saved Messages
8: Set Greeting or Password
#: Disconnect
0: Operator
9: Replay Prompt
5. Following selection, additional prompts will be presented.
6. At completion of session, hang-up to return to idle.
To attach a memo to the current voice message:
1. After Message Playback, dial 7 during or after Message Option Prompt.
2. Following the beep, record the desired memo.
3. Dial
*
to stop recording and store the memo.
4. During or after the New/Old Option Prompt, dial 4 to forward the message and memo.
ADMIN PROGRAMMING
Station
Station VMIB Attributes (PGM 145) … see details on page A-43
PGM 145 BTN RANGE DEFAULT
VMIB ACCESS -- Permits station access to VMIB. 1 0: Disable
1: Enable
Disable
PROMPT LANGUAGE INDEX -- Selected language type prompt is
played to the user when accessing the VMIB.
21-3 1
AUTO-RECORD SERVICE -- Determines if user can record a
conversation with another user (internal/external). It can be used
without two-way record button.
30: Disable
1: Enable
Disable
Release 1.0
November 2010