Technical data

VMIB Integrated Auto Attd/Voice Mail 3-260
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
OPERATION
Digital Phone
To assign a {VMAILBOX} Flex button:
Press [PGM] + {FLEX} + Button Feature Type(1) + {VMIB Access Feature Code} + [SAVE]
To retrieve Voice Mail locally:
1. Lift the handset or press the [SPEAKER] button
2. Press [MSG/CALLBK] button.
3. Dial 2 to select VMIB Messages; the Mail Box & Password prompts will be played.
4. Enter the Mailbox (Station number) and corresponding password; if entry is valid, the
Number of Messages prompt will be presented.
5. Dial desired option code,
1: Play New Messages
2: Play Saved Messages
8: Set Greeting or Password
#: Disconnect
0: Operator
9: Replay Prompt
6. Following selection, additional prompts will be presented.
7. At completion of session, hang-up to return to idle.
OR
1. Lift the handset or press the [SPEAKER] button
2. Press {VMAILBOX} button.
3. Enter the Mailbox password corresponding to the Station; if entry is valid, the Number
of Messages prompt will be presented.
4. Dial desired option code (refer to Step 5 above).
5. Following selection, additional prompts will be presented.
6. At completion of session, hang-up to return to idle.
To attach a memo to the current voice message:
1. After message playback, dial 7 during or after message option prompt.
2. Following the beep, record the desired memo.
3. Press
*
key to stop recording and store the memo.
4. During or after the New/Old Option Prompt, dial to forward the message and memo.
Release 1.0
November 2010