Technical data

VMIB Integrated Auto Attd/Voice Mail 3-259
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
HARDWARE
VMIB
Message Retrieval
A user can access their Mailbox locally from a Digital Phone by dialing the {VIMB Access
Feature Code}, by pressing the [MSG/CALLBK] button, or by pressing a pre-assigned
{VMAILBOX} Flex button when Off-Hook receiving Intercom dial tone. Prompts are presented
to guide the User in the Voice Mailbox operation. The User must enter a Mailbox number
(Station number), and a corresponding password in response to the Request for Mailbox
number (“Please enter your Mailbox number.”) and Request for Password ("Please enter your
password code.") prompts. Additional prompts and mailbox operation is described in Operation,
or refer to your Phone or Voice Mail User Guide.
CONDITIONS
- If no new/old messages are available, pressing 1 or 2, is an invalid operation and the
User receives the “Invalid Entry” prompt or “No Message” prompt.
- If the dialed number is not recognized, the "Invalid Entry" prompt is played; after the
second invalid entry, the User is disconnected.
- The User may dial digits at any time during Voice Mail playback, System Prompt or
silence; the user must dial a digit in response to a System Prompt within the CCR
Analysis timer or the System will return an error tone and disconnect the call.
- Messages can be retrieved in either a FIFO (First in First out) or LIFO (Last in First
out).
REC-MSG BACKUP STA -- When station has new voice mail saved
on the VM internal boards, this information is reported to the assigned
Phontage number. Phontage user can backup saved voice mail from
VM internal boards to the hard disk of the Phontage
program-installed PC.
6- -
BACKUP MSG DELETE -- When enabled, Phontage user can delete
all voice mail in VM internal boards.
70: Disable
1: Enable
Disable
VMIB MSG TYPE -- Messages stored in the VMIB may be retrieved
in either a FIFO (first-in-first-out) or LIFO (last-in-first-out) order
based on this entry.
80: LIFO
1: FIFO
LIFO
VMIB NEW MSG NO -- Display the number of new messages. 9 - -
VMIB SAVE MSG NO -- Display the number of saved messages. 10 - -
PGM 145 BTN RANGE DEFAULT
Release 1.0
November 2010