Technical data

Traffic Analysis 3-246
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
Traffic Analysis
The System monitors, stores and periodically or upon request outputs various traffic statistics
covering System resources. The output from the System can be used to:
• Monitor and evaluate system performance
• Observe usage trends and recommend possible corrective actions,
• Determine possible trunk problems (ex., blocking level too high), and/or
• Recommend System upgrades.
The Traffic report selected by the Attendant will be output only upon request. It is sent to the
defined System RS-232 or TCP port.
System resources covered by Traffic Reports are:
• Tenant Call Summary Report (Hourly)
• Call Type Summary Report (Hourly)
• CO Group Summary Report (Hourly)
CONDITIONS
- Traffic Reports printing can generate Attendant, Call Summary and CO/IP Summary
Traffic Reports.
OPERATION
System Attendant
To print a Tenant Traffic Report:
1. Press the [PGM] button.
2. Dial 021 {Tenant Traffic Report code}.
3. Select Tenant number (0: All, or 1-9)
4. Select Day Information (0: Yesterday, 1: Today)
5. Press the [SAVE] button.
To print a Call Type Traffic Report:
1. Press the [PGM] button.
2. Dial 022 {Call Type Traffic Report code}.
3. Select Day Information (0: Yesterday, 1: Today)
4. Press the [SAVE] button.
Release 1.0
November 2010