Technical data

System Networking 3-245
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
DECT Mobility
When one DECT is registered to more than two networked systems at the same time and the
user of DECT moves to another networked system, the incoming call to DECT will be routed to
the appropriate networked system automatically.
CONDITIONS
- DECT mobility information is sent through the LAN port of MPB.
- The physical port number of the DECT should be same as on whole systems.
- DECT must be registered to more than two systems for this functionality to work (refer
to the Vertical DECT Installation Manual).
OPERATION
DECT Mobility is automatic.
ADMIN PROGRAMMING
Voice Network
Network Basic Attribute (PGM 320 - FLEX 6-10)
Network Numbering Plan Table (PGM 321 - FLEX 8)
PGM 320 BTN RANGE DEFAULT
BLF USAGE -- Used to set Networking BLF service. 6 0:Off
1:On
Off
TCP PORT FOR BLF -- TCP Port for sending BLF message to BLF
Manager.
7 9000-999
9
9000
UDP PORT FOR BLF -- UDP Port for sending BLF message to BLF
Manager.
8 9000-999
9
9001
DURATION OF BLF STS -- Duration for sending the BLF status
message to the BLF Server.
9 01-99 10
BLF MANAGER IP -- IP Address of BLF Server used only when 0
MBX IP is configured with other systems for Voce Networking
(Reserved).
10 - 0.0.0.0
PGM 321 BTN RANGE DEFAULT
BLF SYSTEM IP -- IP Address of BLF Server used only when MBX
IP is configured with other systems for Voice Networking
8 - 0.0.0.0
Release 1.0
November 2010