Technical data

Account Code 3-1
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
Chapter 3
System Features
This chapter provides detailed information covering description and operation of the numerous
features available in the MBX IP System Software.
Account Code
Station users may enter a non-verified variable length (up to 12 digits) identifier for tracking
specific calls. The identifier or “Account Code” is output as part of the Station Message Detail
Record (SMDR) for the call.
CONDITIONS
- If an Authorization Code is entered as the Account Code, the SMDR record will show
the station number or the bin number for a System Authorization Code rather than the
user entered Authorization Code.
OPERATION
Digital Phone
To assign a Flex button for {ACCOUNT CODE} operation:
Press [PGM] +
{FLEX} + Button Feature Type (1) + {Account Code Feature Code} +
{Account Code} +
*
+ [SAVE]
To enter an Account Code using an {ACCOUNT CODE} button prior to placing a call when
account code is not entered in the button:
1. Lift the handset
2. Press the {account code} button.
3. Dial the Account Code (1 to 12 digits).
4. Press
*
; Intercom dial tone is heard.
5. Place the CO/IP call as normal.
Release 1.0
November 2010