Technical data

System Networking 3-242
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
BLF Presentation
Stations on one node are able to program a busy lamp appearance at an extension on another
node. The Busy Lamp Field (BLF) key can also be used to call the remote extension. The BLF
presentation can be utilized with BLF manager software based on programming settings.
CONDITIONS
- If BLF manger S/W is used for BLF Presentation, the BLF manager should be
installed at one system for completely networked systems.
- The number of Net DSS can be restricted according to the capability of each system.
- When a flexible button on a station is assigned as the [NET DSS] button of another
system, the system serves as local BLF to indicate the status of the station.
- CO BLF is not supported, and also ringing signal does not update a status of that
station (ICM / CO / Transfer / CO Recall ring).
OPERATION
BLF function is automatic.
VOIP CPN INFO -- 1: 001 VOIP CPN INFO 1
2: 001 VOIP CPN INFO 2
3: 001 VOIP CPN INFO 3
4: 001 VOIP CPN INFO 4
7- -
BLF SYSTEM IP -- IP Address of BLF Server used only when MBX
IP is configured with other systems for Voice Networking
8 - 0.0.0.0
BLF SYSTEM PORT -- UDP port for sending BLF message to BLF
Manager.
9 - 9500
FIREWALL ROUTING -- Select IP address (Firewall IP address or
Non-firewall IP address). If the destination system is in same VPN
then Non-firewall IP address should be sent. Otherwise the firewall IP
address should be sent. ON: Send firewall IP address
OFF: Send Non-firewall (Internal) IP address
10 0: Off
1: On
On
PGM 321 BTN RANGE DEFAULT
Release 1.0
November 2010