Technical data

System Networking 3-241
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
Network Numbering Plan (PGM 321) … see details on page A-146
NET CONP ENABLE -- Reserved for future usage. 3 0:Off
1:On
Off
NET SIGNAL METHOD -- Select the information element type for
QSIG supplementary service message.
4 0:UUS
1:FAC
UUS
NET CC RETAIN -- If this value is set to ON, the signaling of call
completion retain mode is executed. Used for networking
supplementary signaling type of the call completion.
5 0:Off
1:On
Off
BLF USAGE -- Used to set Networking BLF service. 6 0:Off
1:On
Off
TCP PORT FOR BLF -- TCP Port for sending BLF message to BLF
Manager.
7 9000-9999 9000
UDP PORT FOR BLF -- UDP Port for sending BLF message to BLF
Manager.
8 9000-9999 9001
DURATION OF BLF STS -- Duration for sending the BLF status
message to the BLF Server.
9 01-99 10
BLF MANAGER IP -- IP Address of BLF Server used only when 0
MBX IP is configured with other systems for Voce Networking
(Reserved).
10 - 0.0.0.0
PGM 321 BTN RANGE DEFAULT
NUMBER TYPE -- Select Number Type 1 0: Net
1: Transit
Net
NUM PLAN CODE -- 'X' means any digits can be inserted between
0-9. (Select 'MUTE" button to input X).
28 digits -
CO GROUP NO -- CO Group Number 3 01-72 -
AND DIGIT -- AND (Automatic Network Dialing) Digit 4 10 digits -
DIGIT REPEAT -- Determine if AND digit is included in the SETUP
message or not.
50: Off
1: On
Off
DIGIT SENDING -- Select digit sending mode (Overlap or Enblock) 6 0: Overlap
1: Enblock
Overlap
PGM 320 BTN RANGE DEFAULT
Release 1.0
November 2010