Technical data

System Networking 3-238
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
OPERATION
If programmed, Attendant Call operation is automatic.
ADMIN PROGRAMMING
Tenant Data
Attendant Attribute (PGM 272 - FLEX 3 - FLEX 5) … see details on page A-124
Night Attendant Group Assign (PGM 275) … see details on page A-126
PGM 272 BTN RANGE DEFAULT
FORWARD TYPE -- Determines the Forward type to use.
0: Not used 1: Unconditional - call is routed to a forward
destination unconditionally. 2: Queuing overflow - call is
routed to a forward destination when a queue overflows. 3:
Queuing timeout - call is routed to a forward destination
when queuing time expires. 4: Queuing all - call is routed to
a forward destination when a queue overflows or queuing
time expires.
3 0: Not Used
1: Uncond
2: Q Overflow
3: Time out
4: All
0: Not Used
FWD DESTINATION -- Determines the forward destination
(trunk access code should be included).
5 Max 16 digits -
PGM 275 BTN RANGE DEFAULT
NIGHT ATTD GR TYPE -- NightDetermines the type of Night
Attendant group.
1 0: Terminal
1: Circular
2: Ring
3: Longest Idle
0: Terminal
NIGHT ATTD GR NAME -- Determines the name of the night
Attendant group.
2 Max 16 -
NIGHT MEMBER ASG -- Assigns Stations as members of a Night
Attendant group.
3- -
Release 1.0
November 2010