Technical data

System Networking 3-237
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
Attendant Call (CAS)
An Attendant Call from any node can be routed to the Centralized Attendant (CAS); the call will
be queued when all Centralized Attendants are busy.
CONDITIONS
- A Recall Call is not routed to CAS on the Master System.
- The CAS DN Number can be converted to Attendant Call code using the Digit Conv.
Table.
- An Attendant Call can be rerouted to CAS according to the Forward type and
Destination.
- If all Attendants press [DND] button, CAS will be covered by the Night Attendant
Group.
- If the Forward Destination of Night Attendant group is CAS, the Attendant Call will be
routed to CAS.
CO GROUP NO -- CO Group Number 3 01-72 -
AND DIGIT -- AND (Automatic Network Dialing) Digit 4 10 digits -
DIGIT REPEAT -- Determine if AND digit is included in the SETUP
message or not.
50: Off
1: On
Off
DIGIT SENDING -- Select digit sending mode (Overlap or Enblock) 6 0: Overlap
1: Enblock
Overlap
VOIP CPN INFO -- 1: 001 VOIP CPN INFO 1
2: 001 VOIP CPN INFO 2
3: 001 VOIP CPN INFO 3
4: 001 VOIP CPN INFO 4
7- -
BLF SYSTEM IP -- IP Address of BLF Server used only when MBX
IP is configured with other systems for Voice Networking
8 - 0.0.0.0
BLF SYSTEM PORT -- UDP port for sending BLF message to BLF
Manager.
9 - 9500
FIREWALL ROUTING -- Select IP address (Firewall IP address or
Non-firewall IP address). If the destination system is in same VPN
then Non-firewall IP address should be sent. Otherwise the firewall IP
address should be sent. ON: Send firewall IP address
OFF: Send Non-firewall (Internal) IP address
10 0: Off
1: On
On
PGM 321 BTN RANGE DEFAULT
Release 1.0
November 2010