Technical data

System Networking 3-233
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
Voice Network
Network Basic Attribute (PGM 320) … see details on page A-145
OUTGOING GRP NO -- Determines the CO Group
number used to seize. NOTE: If not assigned, the
access code is used as LOOP key.
3 01-72 (MBX IP-300)
01-24 (MBX IP-100)
Not assigned to the
first access code.
01-72 (MBX IP-300)
01-24 (MBX IP-100)
is assigned
sequentially from the
second access code
AND DGT -- Automatic Network Dialing (AND) digit
is sent after CO line seized. This feature allows user
to initiate CO calls only by dialing CO Group Access
Code.
4 Max 10 digits -
ARS SERVICE -- If Alternate Route Selection
(ARS) is set, ARS digit is dialed instead of CO
Group Access code when there is no available path.
50: Off
1: On
Off
ARS DGT 1 -- Alternate CO Group Access code to
be used when original CO Group Access code
failed to find available CO line.
6 Max 8 digits -
ARS 1 OGR DGT -- When alternate CO Group
Access code is used, this field defines if original
digits or converted digits are used.
70: Off
1: On
Off
ARS DGT 2 -- Second alternate CO Group Access
code to be used when original CO Group Access
code and first ARS code failed to find available CO
line.
8 Max 8 digits -
ARS 2 OGR DGT -- When alternate CO Group
Access code is used, this field defines if original
digits or converted digits are used.
90: Off
1: On
Off
PGM 320 BTN RANGE DEFAULT
NET ENABLE -- Enable Networking function. 1 0:Off
1:On
Off
NET CNIP ENABLE -- The name of the calling station is sent to the
called System between MBX IP systems. CNIP is displayed at the
called party Stations display based on the programming.
2 0:Off
1:On
On
PGM 180 BTN RANGE DEFAULT
Release 1.0
November 2010