Technical data

System Networking 3-232
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
CO Group Access (PGM 180) … see details on page A-65
OUTGOING CALL TRANSFER RELEASE TYPE -- if outgoing
CO call can be transferred to other CO call, release type can
be set. If set to None, it is not disconnected.
30: None
1: Release after
Release Timer
None
OUTGOING
CALL TRANSFER RELEASE TIME -- if an
outgoing CO call is transferred to CO call and CO - to - CO call
is started, the call is disconnected after release time, when
release type is set to 'Rls after Rls Time'. Before disconnecting,
a warning tone is provided.
4 000-300 (sec) 060
INCOMING CALL TRANSFER DIRECTLY -- if this feature
is set to ON, CO incoming call can be transferred directly
without any stations or ATD to transfer the call.
5 0: Off
1: On
Off
STATION INCOMING
CALL TRANSFER -- while stations
are connected to incoming CO call of first CO Group, the
station can transfer the call to second CO group.
6 0: Off
1: On
On
ATD INCOMING CALL TRANSFER -- while ATD is
connected to incoming CO call of first CO Group, the ATD can
transfer the call to second CO group.
7 0: Off
1: On
On
INCOMING CALL TRANSFER RELEASE TYPE -- If incoming
CO call can be transferred to other CO call, release type can
be set. If set to None, it is not disconnected.
80: None
1: Release after
Release Timer
None
INCOMING
CALL TRANSFER RELEASE TIME -- If an
incoming CO call is transferred to CO call and CO - to - CO call
is started, the call is disconnected after release time, when
release type is set to 'Rls after Rls Time'. Before disconnected,
warning tone is provided.
9 000-300 (sec) 060
PGM 180 BTN RANGE DEFAULT
ACCESS CODE NAME -- When a CO Grp Access
code is dialed or Flex Button is pressed; name is
displayed on the station's LCD.
1 Max 16 chars -
CO LINE CHOICE -- Decide to select to CO line
priority to seize. NOTE: When Outgoing Group
Number is not assigned, this option is not applied.
2 0: Round Robin
1: Last Line
2: First Line
Last Line
PGM 179 BTN RANGE DEFAULT
Release 1.0
November 2010