Technical data

System Networking 3-230
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
Network Numbering Plan (PGM 321) … see details on page A-146
CO Transit-Out
This feature enables a user to maximize use of the network and reduce call costs by routing
outgoing calls to the nearest appropriate point on the network. The system should provide
sufficient digit translation or string analysis options to enable the switch to route the call
correctly. A sub-system with no public network connection can gain access to public network
using the Main System connection.
Refer to the Administration Programming Manual for a full description of programming for this
function.
PGM 321 BTN RANGE DEFAULT
NUMBER TYPE -- Select Number Type 1 0: Net
1: Transit
Net
NUM PLAN CODE -- 'X' means any digits can be inserted between
0-9. (Select 'MUTE" button to input X).
28 digits -
CO GROUP NO -- CO Group Number 3 01-72 -
AND DIGIT -- AND (Automatic Network Dialing) Digit 4 10 digits -
DIGIT REPEAT -- Determine if AND digit is included in the SETUP
message or not.
50: Off
1: On
Off
DIGIT SENDING -- Select digit sending mode (Overlap or Enblock) 6 0: Overlap
1: Enblock
Overlap
VOIP CPN INFO -- 1: 001 VOIP CPN INFO 1
2: 001 VOIP CPN INFO 2
3: 001 VOIP CPN INFO 3
4: 001 VOIP CPN INFO 4
7- -
BLF SYSTEM IP -- IP Address of BLF Server used only when MBX
IP is configured with other systems for Voice Networking
8 - 0.0.0.0
BLF SYSTEM PORT -- UDP port for sending BLF message to BLF
Manager.
9 - 9500
FIREWALL ROUTING -- Select IP address (Firewall IP address or
Non-firewall IP address). If the destination system is in same VPN
then Non-firewall IP address should be sent. Otherwise the firewall IP
address should be sent. ON: Send firewall IP address
OFF: Send Non-firewall (Internal) IP address
10 0: Off
1: On
On
Release 1.0
November 2010