Technical data

System Networking 3-228
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
CO Transit-In
The incoming DID call can reroute to a Net Call destination on another System.
CONDITIONS
- Outside caller hears a busy tone when a Networking Path is not available during
transit.
- A Network CO Line is seized automatically, and the call will be transferred to the
Network Destination; the destination will receive ringing with CLI from PX, however
the outside User will hear a Ring-Back tone.
- Both the outside User and the Destination Station will be connected when the
destination station answers the ringing.
OPERATION
CO Line programming:
Press [PGM] + 177 (CO COS) + Select the desired Incoming CO Line + Assign COS
01-15 (Toll Exception Table is also applied to Transit Calls).
If configured, CO Transit-In operation is automatic.
ADMIN PROGRAMMING
CO Line Data
CO COS (PGM 177) … see details on page A-63
BLF SYSTEM IP -- IP Address of BLF Server used only when MBX
IP is configured with other systems for Voice Networking
8 - 0.0.0.0
BLF SYSTEM PORT -- UDP port for sending BLF message to BLF
Manager.
9 - 9500
FIREWALL ROUTING -- Select IP address (Firewall IP address or
Non-firewall IP address). If the destination system is in same VPN
then Non-firewall IP address should be sent. Otherwise the firewall IP
address should be sent. ON: Send firewall IP address
OFF: Send Non-firewall (Internal) IP address
10 0: Off
1: On
On
PGM 177 BTN RANGE DEFAULT
DAY COS -- CO COS in Day mode. 1 00-15 0
PGM 321 BTN RANGE DEFAULT
Release 1.0
November 2010