Technical data

System Networking 3-222
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
Network Numbering Plan (PGM 321) … see details on page A-146
DURATION OF BLF STS -- Duration for sending the BLF status
message to the BLF Server.
9 01-99 10
BLF MANAGER IP -- IP Address of BLF Server used only when 0
MBX IP is configured with other systems for Voce Networking
(Reserved).
10 - 0.0.0.0
PGM 321 BTN RANGE DEFAULT
NUMBER TYPE -- Select Number Type 1 0: Net
1: Transit
Net
NUM PLAN CODE -- 'X' means any digits can be inserted between
0-9. (Select 'MUTE" button to input X).
28 digits -
CO GROUP NO -- CO Group Number 3 01-72 -
AND DIGIT -- AND (Automatic Network Dialing) Digit 4 10 digits -
DIGIT REPEAT -- Determine if AND digit is included in the SETUP
message or not.
50: Off
1: On
Off
DIGIT SENDING -- Select digit sending mode (Overlap or Enblock) 6 0: Overlap
1: Enblock
Overlap
VOIP CPN INFO -- 1: 001 VOIP CPN INFO 1
2: 001 VOIP CPN INFO 2
3: 001 VOIP CPN INFO 3
4: 001 VOIP CPN INFO 4
7- -
BLF SYSTEM IP -- IP Address of BLF Server used only when MBX
IP is configured with other systems for Voice Networking
8 - 0.0.0.0
BLF SYSTEM PORT -- UDP port for sending BLF message to BLF
Manager.
9 - 9500
FIREWALL ROUTING -- Select IP address (Firewall IP address or
Non-firewall IP address). If the destination system is in same VPN
then Non-firewall IP address should be sent. Otherwise the firewall IP
address should be sent. ON: Send firewall IP address
OFF: Send Non-firewall (Internal) IP address
10 0: Off
1: On
On
PGM 320 BTN RANGE DEFAULT
Release 1.0
November 2010