Technical data

System Networking 3-221
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
3. Make a Net Call to another Station on another node.
4. Press the [CONF] button when the 3rd party answers.
5. The second call is placed on Hold and an ICM Dial tone is provided.
6. Press the [CONF] button again at the Master Station; all parties will be connected.
To clear a Net Conference:
1. Any Station in the Net Conference can hang-up during the conference.
2. After all parties disconnect, the net conference will be cancelled and the network path
will be cleared.
ADMIN PROGRAMMING
Voice Network
Network Basic Attribute (PGM 320) … see details on page A-145
PGM 320 BTN RANGE DEFAULT
NET ENABLE -- Enable Networking function. 1 0:Off
1:On
Off
NET CNIP ENABLE -- The name of the calling station is sent to the
called System between MBX IP systems. CNIP is displayed at the
called party Stations display based on the programming.
2 0:Off
1:On
On
NET CONP ENABLE -- Reserved for future usage. 3 0:Off
1:On
Off
NET SIGNAL METHOD -- Select the information element type for
QSIG supplementary service message.
4 0:UUS
1:FAC
UUS
NET CC RETAIN -- If this value is set to ON, the signaling of call
completion retain mode is executed. Used for networking
supplementary signaling type of the call completion.
5 0:Off
1:On
Off
BLF USAGE -- Used to set Networking BLF service. 6 0:Off
1:On
Off
TCP PORT FOR BLF -- TCP Port for sending BLF message to BLF
Manager.
7 9000-9999 9000
UDP PORT FOR BLF -- UDP Port for sending BLF message to BLF
Manager.
8 9000-9999 9001
Release 1.0
November 2010